Back to Blog
How-to Guides 2026-11-15 Thirsties Baby 0 views

How to Layer Hemp Inserts 2 Pack for Nighttime Diapers

How to Layer Hemp Inserts 2 Pack for Nighttime Diapers

Build a heavier overnight cloth diaper setup with the Hemp Inserts 2 pack. Learn how to layer hemp inserts, choose the Small or Large size, and boost absorbency without bulk.

Start with the right size insert

Before you layer, match the insert to your diaper. The Hemp Inserts 2 pack comes in two sizes: Small at 4.5"W x 11.75"L and Large at 5"W x 13.75"L. A smaller insert fits more easily inside a trim diaper, while the larger size gives you more coverage for bigger babies or longer overnight stretches. Choose the size that lies flat inside your diaper without bunching or sticking out at the edges.

Hemp is a slow and stable absorber, and it is twice as absorbent as cotton. That makes it a strong choice for nighttime cloth diaper absorbency, when urine comes steadily over many hours. But slow absorption also means hemp works best when it has a fast-absorbing layer above it, so the diaper surface stays drier at the start of the night.

How to layer hemp inserts for an overnight setup

  1. 1. Place a fast-absorbing layer closest to your baby: Put your usual stay-dry or cotton insert against the skin first. Hemp is slow and stable, so it should sit underneath a faster layer rather than directly against your baby.
  2. 2. Add the hemp insert beneath: Slide the Hemp Inserts 2 pack insert under the top layer, centered in the diaper. The hemp acts as a reservoir that keeps absorbing through the night.
  3. 3. Use both inserts if you need more capacity: The 2 pack gives you two inserts. You can stack both for heavy wetters or use one at a time and keep the other as a backup. Layering both adds absorbency but also adds bulk, so check that the diaper still fits well.
  4. 4. Check the fit before bedtime: Make sure the insert lies flat, does not bunch at the legs, and stays fully inside the cover. A bunched insert can leave gaps where leaks start.

Why hemp works for nighttime but needs a partner

Hemp's strength is total capacity, not speed. It absorbs slowly and holds steadily, which suits overnight cloth diaper setup because the diaper is on for many hours. The trade-off is that a hemp-only layer can feel wet at the surface before it has absorbed much. Pairing hemp with a faster layer on top gives you the best of both: quick initial absorption and long, stable storage below.

If you are already using a stay-dry insert, hemp is a natural addition underneath it. If you are not, a cotton insert or your usual diaper insert can serve as the top layer. The key is that hemp sits below, not on top.

Hemp Inserts 2 pack at a glance

  • Hemp Inserts 2 pack: Hemp is twice as absorbent as cotton and is a slow and stable absorber. This is why hemp is a good base layer for nighttime cloth diaper absorbency: it holds a lot and releases it slowly, but it needs a faster layer above it.
    Hemp Inserts 2 pack
    Hemp Inserts 2 pack
  • Hemp Inserts 2 pack: Available in Small (4.5"W x 11.75"L) and Large (5"W x 13.75"L). Choose the size that fits flat inside your diaper. The larger size gives more coverage for bigger babies or longer nights.
  • Hemp Inserts 2 pack: Add hemp inserts to your diapering system for heavy wetters or nighttime use. This confirms the intended use: boosting absorbency for heavy wetters and overnight diapers.

What to check when you boost cloth diaper absorbency

More absorbency is not always better if it ruins the fit. After you add a hemp insert, check that the diaper still closes comfortably, the legs are snug, and the insert does not create bulk that pushes the cover away from the body. If the fit gets tight, try one insert instead of two, or switch to the smaller size.

Also check how your baby feels in the morning. Hemp holds moisture well, but if the surface feels very wet, add or adjust a stay-dry layer on top. If the diaper is soaked through, you may need more total capacity, such as both inserts from the 2 pack or a larger size.

The supplied information for the Hemp Inserts 2 pack does not include specific washing or preparation instructions. Follow the care guidance provided with your diaper system and the insert packaging rather than guessing at temperatures or wash routines.

Small vs Large: which size to layer

  • Small (4.5"W x 11.75"L): A trimmer option that fits easily into smaller diapers or adds a moderate boost. Good when you want extra nighttime absorbency without much bulk.
  • Large (5"W x 13.75"L): More surface area for bigger babies or longer overnight stretches. Choose this when the Small leaves gaps or when you need maximum coverage.

Related Articles

Customer Service
Home
Products
Cart
Profile